What Are Glycol Chiller Systems?

Glycol chiller systems are widely used across UK industries where precise temperature control is required. From breweries and dairies to laboratories and manufacturing plants, these systems provide consistent cooling performance using a solution of glycol blended with water to transfer heat.

Unlike standard water chillers, glycol chillers use a glycol-based solution that lowers the freezing point of the circulating fluid. This makes them suitable for processes requiring sub-zero temperatures and environments subject to low ambient conditions.

At a fundamental level, glycol chiller systems extract unwanted heat via a closed refrigeration cycle. The cooled glycol solution is then pumped through pipework to absorb heat from equipment or products before returning to the chiller.

How a Glycol Chiller System Works

A well-considered glycol chiller system design supports efficiency and stable operation. Core components typically include:

• Refrigeration compressor


• Heat rejection condenser


• Evaporator heat exchanger


• Expansion valve


• Glycol reservoir and pump


• Control panel

Within the evaporator, the refrigeration cycle removes heat from the circulating glycol solution. The chilled solution is then sent to the process load, absorbs heat, and flows back to the unit.

A typical glycol chiller system diagram shows the separation between the primary refrigeration loop and the secondary glycol circuit. The refrigeration loop manages heat removal, while the glycol loop transfers chilled fluid to the point of use. Accurate schematics are valuable for installation, servicing and fault finding.

The Control Panel: Managing Performance and Safety

The glycol chiller system control panel acts as the operational centre of the system. Modern panels typically include:

• Digital temperature controllers


• Integrated logic controllers


• High and low pressure safety switches


• Pump sequencing controls


• Fault indication systems


• Remote monitoring capabilities

The control panel regulates compressor operation, maintains setpoint temperatures and monitors system pressures. Many systems also log performance data to support service planning and operational records.

In facilities requiring precise cooling, reliable control prevents temperature drift that could affect product quality or equipment integrity.

Installing a Glycol Chiller System Control Panel

Proper glycol chiller system control panel installation is essential for consistent performance and regulatory compliance. Key factors include:

• Electrical compliance – Connections must align with UK wiring regulations and include suitable isolation and circuit protection.


• Location and ventilation – Panels should be located in dry, well-ventilated areas away from excessive heat, vibration or moisture.


• Commissioning procedures – Qualified engineers should verify sensor calibration, test alarms and confirm pressure switch operation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Key Factors in System Design

Effective glycol chiller system design begins with accurate assessment of the cooling load. Engineers evaluate:

• Required temperature range


• Flow rate and pipe sizing


• Ambient environmental conditions


• System resilience planning


• Allowance for capacity growth

Oversized systems increase energy consumption, while undersized units struggle to maintain setpoints. Load calculations must consider maximum usage scenarios and continuous duty patterns.

Fluid selection also plays a role. Food-related industries often favour propylene glycol for safety reasons, whereas ethylene glycol may be selected for industrial environments requiring improved heat transfer efficiency.

Additional considerations such as insulation standards, pump capacity and exchanger design influence stability, efficiency and lifespan.

Applications of Glycol Chiller Systems

Glycol chiller systems support numerous sectors across the UK, including:

• Breweries and distilleries


• Food manufacturing plants


• Medical and laboratory facilities


• Precision equipment temperature control


• Plastics processing and injection moulding


• Cold storage and preparation areas

For example, in beverage production, chillers regulate process temperatures and stabilise product storage. In manufacturing settings, they protect equipment from excessive thermal build-up.

Protecting System Performance

Routine maintenance supports efficient operation and reduced downtime. Typical servicing tasks include:

• Checking glycol concentration levels


• Inspecting pumps and seals


• Cleaning condenser coils


• Verifying control panel settings


• Monitoring refrigerant pressures

Over time, glycol can lose effectiveness through dilution or contamination, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Common Queries About Glycol Chiller Systems

What is the typical glycol percentage?

The required percentage depends on freeze protection and operating temperature, commonly ranging from 20–40%.

Is external installation possible?

Yes, provided the unit is rated for outdoor use and protected against environmental exposure.

How does a glycol chiller differ from a water chiller?

Glycol systems use a glycol-water mixture to allow lower operating temperatures and prevent freezing.

Do modern control panels support remote monitoring?

Many contemporary glycol chiller system control panels integrate with BMS platforms or secure remote systems.

How often should glycol fluid be tested?

Annual testing is common, though high-demand systems may require more frequent checks.

Where are they most commonly used?

Industries requiring stable and low-temperature control frequently depend on glycol-based systems.

Final Considerations

Glycol chiller systems deliver dependable cooling performance across a broad range of industrial and commercial applications. From accurate load calculation and correct commissioning through to routine servicing, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, engaging knowledgeable engineers helps align system capacity with process needs. For technical advice and tailored solutions, consult the Newsome glycol chillers page to explore engineered glycol cooling solutions designed for long-term performance.